74151 Data Selectors/Mux

This data selectors/multiplexer contains full on-chip decoding to select the desired data source. The ‘LS151 selects one of eight data sources. The ‘LS151 has a strobe input which must be at a low logic level to enable these devices. A high level at the strobe forces the W output high, and the Y output low. The ‘LS151 features complementary W and Y outputs.

Features of 74151 Data Selectors/Mux

• Select one of eight data lines
• Performs parallel-to-serial conversion
• Permits multiplexing from N lines to one line
• Also for use as a Boolean function generator
• Typical average propagation delay time data input to W output 12.5 ns
• Typical power dissipation 30 mW
• An alternate Military/Aerospace device (54LS151) is available. Contact a National Semiconductor Sales Office/Distributor for specifications.

Specifications of 74151 Data Selectors/Mux:

• Recommended Operating Voltage:4.75-5.25V
• Minimum High-Level Input Voltage:2V
• Maximum Low-Level Input Voltage:0.8V
• Made in China