Sanwa DCM-301 Clamp Meter
৳ 9,200.00
- The CT shape makes it easier to clamp cable in crowded.
- An electric field (EF) function is incorporated in the tip of the CT to enable detection of about AC 90V or more.
- Large, easy-to -press HOLD button.
- Equipped with LED light to illuminate the measurement target.
Description
Specifications
| Function | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| ACA | 60.00/600.0/1000A | ±(2.5%+5) | 0.01A |
| ACV | 6.000/60.00/600.0/1000V | ±(1.5%+3) | 0.001V |
| DCV | 6.000/60.00/600.0/1000V | ±(1%+3) | 0.001V |
| Resistance | 6.000k/60.00k/600.0k/6.000M/60.00MΩ | ±(2%+5) | 0.001kΩ |
| Frequency | ACV 10Hz-10kHz, ACA 10Hz-2kHz | ±(1%+5) | 0.1Hz |
| Capacitance | 60.00n/600.0n/6.000µ/60.00µ/600.0µ/6.000m/60.00mF | ±(4%+3) | 0.01nF |
| Continuity | Buzzer sounds below 30Ω Open voltage: approx. 1V or less | ||
| Detection of Electricity | Buzzer sounds, “-” is shown on LCD, and LED flickers Detects ACV and EF of approx. 90V or more (50/60Hz) |
||
| Sampling rate | Approx. 3 times/sec. |
| Bandwidth | ACA 45-400Hz ACV 45Hz-1kHz |
| Display | 6000/9999(Hz function) |
| Clamp diameter/Conductor size | Φ34mm/10×64mm |
| Battery | LR03×3 |
| Battery life | Approx. 200 hrs. |
| Size/Mass | H252×W85×D40mm/Approx. 360g |
| Safety standards | IEC61010 CAT.Ⅳ600V/CAT.Ⅲ1000V |
Related Products
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Specifications
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester:
1-2-3-4-5-6-7-8-G – RJ45
1-2-3-4-5-6 – RJ12
1-2-3-4 – RJ11
Main Features:
1. Measuring range 200,000Lux
2. Automatic measuring level selection
3. Maximum and Minimum reading hold function
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large easy-to-read display with bright white backlight
2GB Paper moisture meter is a high-performance and digital moisture testing equipment by our company based on introduction of foreign advanced technology. The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gear is used to measure different kinds of papers, This moisture meter have high precision measuring instruments, and the small size, light weight, portable on-site testing.
- Double Injection Case makes the device more stylish and solid. Streamline Design and Comfortable Handle.
- Large LCD Display makes the reading more clearly.
- Intelligent selection makes the operation simpler.
- Fully safe jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.1A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3288 and 3288-20 clamp multimeters are AC/DC current and voltage clamp meters that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires.
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.
This instrument is a 6000 counts hand-held automatic range True RMS digital clamp meter. The circuit design of the meter takes the large-scale integrated circuit ∑/△ analog-to-digital converter (ADC) as the core, and it has the full-range overload protection. It can be used to measure AC and DC voltage, low-pass filter V.F.C, low-impedance Low Z voltage, AC and DC current, resistance, diode, continuity test, capacitance, frequency, duty cycle, temperature and other parameters, at the same time, it has the data hold, relative value measurement, surge current measurement function, flashlight function, NCV function, Live line judgment, low voltage display and automatic shutdown function.
- Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
- Provides a 10:1 Distance to spot ratio
- Offers single laser targeting for accurate and repeatable measurements
- Features IP54 rating against dust and moisture
Reviews
There are no reviews yet.