-
Sanwa CD772 Digital Multimeters ৳ 14.00Add to cart
- 4000 counts
- Easy to read large LCD with backlight
- Large breaking capacity fuse 30kA
- K type thermocouple temperature measurement -20℃ ~ 300℃
- Thermo plastic elstomer, high resistance against drop shock
- Safety cap on current terminal
- Auto power off (30min.)(cancelable)
-
Sanwa CD800a Digital Multimeters ৳ 4.50Add to cart
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
-
Sanwa CD800a3 Digital Multimeters ৳ 6.00Add to cart
- 6000 count
- True RMS
- 0.7 best accuracy (DCmV)
- Max/Min value hold
- Data hold, Range hold, Relative function
- EF (Electric Field) sensing
- Auto power off (30min.)(cancelable)
- Body cover for protection and as a tilt stand
- Back light
- Chip holder behind the body cover
-
Sanwa DCL-1000 Clamp Meter ৳ 12.00Add to cart
- Lightweight approx. 290g
- Large LCD
- Easy to use large size data hold button
-
Sanwa DCM-301 Clamp Meter ৳ 8.00Add to cart
- The CT shape makes it easier to clamp cable in crowded.
- An electric field (EF) function is incorporated in the tip of the CT to enable detection of about AC 90V or more.
- Large, easy-to -press HOLD button.
- Equipped with LED light to illuminate the measurement target.
-
SANWA DCM660R DIGITAL CLAMP METER (DARK BLUE) ৳ 12,578.00Add to cart
SPECIFICATION:
• AC current measurable max. 660A & DMM function
• True RMS
• LCD with Backlight
• Data hold
• Relative value
• Max / Min value hold
• Inrush current measurement
• Auto power save (15min after the last operation) (No cancelable) -
Sanwa Digital Multimeter CD800a with Tough Body Cover ৳ 4,200.00Add to cart
Specifications
CD800a Measuring Range Accuracy Resolution Input Impedance DCV 400m/4/40/400/600V ±(0.7%+3) 0.1mV 10M-100M Ω ACV 4/40/400/600V ±(1.6%+5) 0.001V 10M-11M Ω DCA 40m/400mA ±(2.2%+5) 0.01mA ACA 40m/400mA ±(2.8%+5) 0.01mA Resistance 400/4k/40k/400k/4M/40M Ω ±(1.2%+5) 0.1 Ω Capacitance 50n/500n/5 μ/50 μ/100 μF ±(5%+10) 0.01nF Frequency 5Hz-100kHz +0.5%+3) Duty cycle 20%-80% +0.5%+5) Continuity Buzzer sounds at between 10 Ω and 120 Ω Open voltage: Approx.0.4V Diode test Open voltage: Approx.1.5V Display numeral display 4000 Sampling rate 3 times/sec. Bandwidth 40Hz-400Hz Fuse 0.5A/250V 1.5kA Φ5×20 Ceramic Battery R6P (1.5V) x2 Battery life Approx.500h (manganese battery) at DCV range Size/Mass H176xW104xD46mm/Approx.340g Test lead length/Pin tip Length: approx. 0.7m/19mm -
Sanwa ENC-3 Tachometer Attachment ৳ 8.00Add to cart
- Set of contact adapter, contact marker, rim speed ring (circumference: 100mm)
-
Sanwa KS-1 Contact-type 3 Phase Detector ৳ 6.00Add to cart
Contact-type 3 phase detector
- Phase sequence and open phase check
- Large size alligator clips
-
Sanwa LX20 Laser Power Meter/Environmental Meter ৳ 17.00Add to cart
Stick-shaped small light sensor (window diameter 9 mm) for narrow position or area
- Easy-to-carry pocket size.
- Separate, stick-shaped light sensor (window diameter 9 mm) from the main body enables measurement of a narrow position or area. The light sensor can also be integrated with the main body for measurement.
- 4039 full-scale count with a bar graph display.
- Improved measurement accuracy by using a silicon photodiode, which has a spectral sensitivity approximating the relative luminous efficiency specified by CIE (Commission Internationale d’Eclairage), in the light sensor.
- Wide measuring range of 0.1 lx to 403.9 klx (403,900 lx).
- Data hold function.
- Auto power save function prevents wasting of battery power.
-
Sanwa MG-1000 Insulation Tester ৳ 20.00Add to cart
Automatic determination of the live state of the measurement line
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
Sanwa PDR-4000 Earth Tester ৳ 20.00Add to cart
Easy to read with backlight
- hree measurement ranges: 40Ω, 400Ω, 4000Ω
- 3-pole/2-pole earth resistance measurement
(Optional accessory TL-68 is necessary for 2-pole measurement.) - Auto power off (10 min./Cancelable)
- Capable of measuring interference voltage
- 2mA measuring current
-
Sanwa PM3 Digital Multimeter ৳ 4.00Add to cart
8.5mm thick body with multi-function
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)(cancelable)
-
Sanwa SE300 Digital Laser Tachometer ৳ 32.00Add to cart
- Designed in pursuit of the ease of holding to enable stable measurement
- Long detection distance in non-contact measurement (max. approx.50 cm), enabling measurement from a distance from the rotating object
- Auto power OFF function (approx. 2 min., cancellation possible) and Bright backlight
- MAX/MIN display function
- Fixed installation is possible using a commercially available camera tripod
-
Sanwa YX360TRF Analog Multitester ৳ 4.00Add to cart
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
SBWZ-PT100 Temperature Sensor Transmitter 0-250C Output 0-5V DC temperature PT100 0-25C ৳ 650.00Add to cart
Essential details
Model: SBWZ-PT100 0-250
Item weight: 0.4 oz
Size: 4 x 4.3 x 2cm/1.6″ x 1.7″ x 0.8″(L*W*T)
Special features: Portable, Quiet
Place of Origin: China
Size: Pocket Size
Color: Multiple colors
Power Supply: 24V DC
Rated Load: 250 Ohm
Output Voltage: 0-5V DC
Sound level: 0.05 dB
Any horsepower: 0.5 hp
Dashboard Static Blocks Topbar
