View cart “Foldable Platform Trolley 300KG” has been added to your cart.

Add to Compare

5322A Electrical Safety Tester Calibrator

Name: 5322A Electrical Safety Tester Calibrator
SKU: dusk16197
Availability: InStock

৳ 0.00

Description

The 5322A combines many functions into a single instrument, replacing discrete resistors, decade boxes and other custom solutions commonly used to calibrate electrical testers. This single-box solution speeds and simplifies calibration because users only need to learn, operate and maintain one calibrator rather than multiple instruments.

The 5322A Electrical Tester Calibrator helps calibration technicians comply with new regulatory standards up to four times faster than with traditional manual, multiple-product methods. The 5322A replaces the 5320A Electrical Tester Calibrator.

Fluke PTi120 Pocket Thermal Camera

Key Features:

Get the infrared troubleshooting power you need.

Automatically organize and file thermal images with Fluke Connect Asset Tagging
Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
5” LCD touchscreen display for easy troubleshooting
-20 °C to +150 °C temperature measurement range
Six color palettes
Can withstand drop up to 1 meter
IP 54 enclosure rating

Specifications: 5322A Electrical Safety Tester Calibrator

Specifications confidence level	99%
Specifications interval	1 year
Power line	115/230 V ac (50/60 Hz) +10 % / -14 %, with the maximum voltage difference between neutral and protective earth not exceeding 15 V. Operation with power line between -10 % and -14 % has limitations in burden current for voltage outputs. See AC/DC Voltage Calibrator (VLC option) below.
Power consumption	1250 VA maximum
Fuse protection	AC mains input: 2 A, 250 V for 230 V, time delay (T2L250 V – 5 mm x 20 mm) 4 A, 250 V for 115 V, time delay (T4L250 V – 5 mm x 20 mm) RCD input: 3.15 A, 250 V, fast (F3.15H250 V – 5 mm x 20 mm) Meter amps (A) input: 20 A, 500 V, time delay (F20H500 V – 6.3 mm x 32 mm) Loop/Line impedance input: 4 A, 500 V, time delay (T4H500 V – 6.3 mm x 32 mm) Leakage current input: 100 mA, 250 V, fast (F100 mL250 V – 5 mm x 20 mm)

Environment
Warm-up time	15 minutes
Temperature performance	Operating temperature: 18 °C to 28 °C Calibration temperature (tcal): 23 °C Temperature coefficient for temperatures outside of tcal ± 5 °C is 0.1 / °C of the specification, for temperatures between 5 °C to 40 °C. Storage temperature: -10 °C to 50 °C Storage recovery time: Typically <24 hours at operating temperature
Relative humidity (operating)	<80 % to 28 °C (resistance outputs >10 GΩ specified for <70 % to 28 °C)
Relative humidity (storage)	90 % non-condensing 0 °C to 50 °C
Altitude	Operating: 3050 m (10 000 ft) Storage: 12 200 m (40 000 ft)

Dimensions and weight
Dimensions	430 mm x 555 mm x 170 mm (16.9 in x 21.8 in x 6.7 in)
Weight	20 kg (44.1 lb)

Compliance

Safety

Mains: IEC 61010-1: Overvoltage category II, pollution degree 2

Measurement: IEC 61010-2-030: 5000 V (not category rated)

Electromagnetic compatibility (EMC)

International:

IEC 61326-1: Basic electromagnetic environment
CISPR 11: Group 1, Class A
- Group 1: Equipment has intentionally generated and/or uses conductively-coupled radiofrequency energy that is necessary for the internal function of the equipment itself.
- Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
  Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.

Korea (KCC):

Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

USA (FCC):

47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Electrical specifications

Low resistance source
Range	100 mΩ to 10 kΩ + 10 mΩ single value selection, dc and line frequency (50/60 Hz)

1.5 kV high resistance source (DC only)
Range	10 kΩ to 10 GΩ + 100 GΩ single value selection

5.5 kV high resistance source (DC only) (5322A with /5 option)
Range	10 kΩ to 100 GΩ

Test voltage measurement
Range	0 V dc to 5500 V dc

Ground bond resistance source
Resistance mode
Range	1 mΩ to 1700 Ω, dc and line frequency (50/60 Hz)

Line/loop impedance source
Range	25 mΩ to 1700 Ω

Correction manual/scan mode
Residual impedance range	0 Ω to 10 Ω
Resolution	1 mΩ

Correction COMP mode (active loop compensation) (5322AVLC Option)
Maximum compensated impedance	0 Ω to 2 Ω
Leakage current source
Range	0.1 to 30 mA
Test voltage	Passive mode: 60 V ac to 250 V ac rms Differential mode: 60 V ac to 250 V ac rms Substitute mode:10 V ac to 250 V ac rms Active mode (5322A/VLC only)¹: 50 V ac to 100 V ac rms
Uncertainty	Passive mode: ± (0.3% setting + 2 μA) Differential mode: ± (0.3% setting + 2 μA) Test uncertainty can be influenced by power line voltage instability Substitute mode: ± (0.3% setting + 2 μA) Active mode (5322A/VLC only)¹: ± (0.3% setting + 1 μA)
	¹ The Active Mode outputs are synchronized with the ac mains frequency to suppress interference between the calibrator and external noise sources.
Human body simulation (for substitute leakage currently only	Resistance range: 0 Ω to 10 000 Ω Resolution: 1 Ω