View cart “Heavy Duty Lifting Belt – Construction & Industrial (Lifting Webbing Slings)” has been added to your cart.

Add to Compare

732C and 734C DC Voltage Reference Standards

Name: 732C and 734C DC Voltage Reference Standards
SKU: dusk16204
Availability: InStock

৳ 0.00

Description

Model: 732C and 734C DC Voltage Reference Standards

The simple way to maintain and disseminate the volt. The Fluke Calibration 732C DC Voltage Reference Standard is a RoHS compliant direct voltage reference used to maintain the volt in primary and secondary standards laboratories.

Individual 732C voltage standards provide 10 V, 1 V, and 0.1 V outputs and may be transported easily to remote locations while the dc reference is maintained in the laboratory.

The Fluke 734C DC Voltage Reference Standard consists of four electrically and mechanically independent 732C DC Reference Standards and a rack-width enclosure. Two model families, Base and Select, differ in that the Select models are two times more stable than the Base models. We Are the Authorize distributor in Bangaladesh and grateful to Tools Bangladesh.

Fluke PTi120 Pocket Thermal Camera

Key Features:

Get the infrared troubleshooting power you need.

Automatically organize and file thermal images with Fluke Connect Asset Tagging
Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
5” LCD touchscreen display for easy troubleshooting
-20 °C to +150 °C temperature measurement range
Six color palettes
Can withstand drop up to 1 meter
IP 54 enclosure rating

Specifications: 732C and 734C DC Voltage Reference Standards

Line voltage is accepted as shown in Table 1. AC line current at 120V ac is typically 0.13A. Table 1. Mains

732C Line Voltage Setting	Line Voltage Accepted	Frequency Accepted
100 V	90 V to 110 V	50 Hz/60 Hz
120 V	108 V to 132 V	50 Hz/60 Hz
220 V	198 V to 242 V	50 Hz/60 Hz
240 V	216 V to 264 V	50 Hz/60 Hz

Battery	Battery Operation	At full charge, the internal battery operates the Product for a minimum of 72hours at 23±5 °C, with 0 mA to 0.1 mA total current drain at the outputs.
	Charging Time	<36 hours with self-contained automatic battery charger
External DC Input	Rear-panel input for external 12 V dc to 15 V dc powers the Product indefinitely. The dc source must be rated ≥300 mA.
Isolation	Resistance from any of the Product binding posts to earth (chassis) ground or to ac line power is >10 000 MΩ shunted by <1000 pF.
Guard and Ground Terminals	Chassis ground connections are provided on both the front and rear panels. Access to the internal guard is provided by a front-panel binding post.
Output Protection	All outputs can be shorted indefinitely without damage to the Product. The 10 V output can withstand voltages from other sources as follows: For voltages ≤220 V dc, the Product is protected for a maximum of 50 mA continuous current. For voltage ≤1100 V dc, the Product is protected for a maximum of 25 mA continuous current or up to 0.6 joules for short periods of time.

Environmental
Specified Operation	Temperature Range: 15 °C to 35 °C
	Relative Humidity: 0% to 90% to 28 °C, to 80% to 35 °C, and to 50% to 50 °C, Noncondensing
	Altitude: 0 m to 1830 m (0 ft to 6000 ft)
Non-specified Operation	Temperature Range: 0 °C to 50 °C
	Relative Humidity: 0% to 90% Noncondensing
	Altitude: 0 m to 3050 m (0ft to 10 000ft)
Storage (Battery Removed)	Temperature Range: -40 °C to 50 °C
	Relative Humidity: Noncondensing
	Altitude: 0m to 12 200 m (0 ft to 40 000 ft)

Electromagnetic Compatibility
(EMC) The Product operates in Standards Laboratory environments where the radio frequency (RF) environment is highly controlled.
International	IEC 61326-2-1; CISPR 11: Group 1, Class A Controlled Electromagnetic Environment Group 1 equipment has intentionally generated and/or use conductively coupled radio-frequency energy which is necessary for the internal functioning of the equipment itself. Class A equipment is equipment suitable for use in all establishments other than domestic and those directly connected to a low voltage power supply network which supplies buildings used for domestic purposes. Emissions which exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of 61326-1 when test leads and/or test probes are connected.
USA (FCC)	47 CFR 15 subpart B, this product is considered an exempt device per clause 15.103
Korea (KCC)	Class A Equipment (Industrial Broadcasting & Communication Equipment) This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

Safety
Safety	IEC 61010-1, Installation Category II, Pollution degree 2
Ingress Protection	IEC 60529: IP20

Mechanical Specifications
	734C Dimensions	732C and 732C-7001 Dimensions
Height	17.8 cm (7.0 in)	13.4 cm (5.28 in)
Width	43.2 cm (17.0 in)	9.8 cm (3.85 in)
Depth	50.3 cm (19.8 in) including handles	40.6 cm (16.0 in)
Weight	30.4 kg (67 lb)	5.91 kg (13 lb)

Performance Specifications

Output Voltages

10 V, 1 V, and 0.1 V are provided at separate binding posts referenced to the VCOM binding post.

Stability

Stability for the 732C outputs at Tcal ±1 °C and IN CAL indicator on is specified in Table 2.

Table 2. Standard Stability

Output Voltage	Stability (± µV/V)
Output Voltage	30 Days	90 Days	1 Year
10 V	0.3	0.8	2.0
1 V	0.6	1.2	3.0
0.1 V	1.2	2.9	9.8

Table 3. Select Stability

Output Voltage	Stability (± µV/V)
Output Voltage	30 Days	90 Days	1 Year
10 V	0.3	0.8	1.0
1 V	0.6	1.2	2.5
0.1 V	1.2	2.9	8.0

Noise at the Output Terminals

Output noise is specified for both day-to-day observations and for short-term observations, at k=1.

Table 4. Noise at the Output Terminals

Output Voltage	S1 (±µV/V)