Fischer FIS EM Plus 390 S Epoxy Mortar in Bangladesh
৳ 4,550.00
Fischer FIS EM Plus 390 S Epoxy Mortar
High-Performance Injection Mortar for Heavy Load Anchoring Resin for Cracked & Non-Cracked Concrete
Applications
-
Post-installed rebar connections in existing concrete
-
Shear connectors, concrete layer jointers
-
Heavy steel structures, rail fixings, tall shelving systems
-
Seismic reinforcement & retrofit
-
Anchorings in water-filled or diamond-drilled holes
-
Temporary or removable fixings (in conjunction with internal threaded anchors)
-
Wood-concrete or wood-steel connections (approval for glued laminated timber)
Packaging: 390 ml cartridge + 2 × static mixer FIS MR Plus
Usage: Chemical anchoring / injection mortar for cracked & non-cracked concrete
Fischer FIS EM Plus 390 S Epoxy Mortar
High-Performance Injection Mortar for Heavy Load Anchoring Resin for Cracked & Non-Cracked Concrete
Product description:
The Fischer FIS EM Plus 390 S is a premium two-component epoxy injection mortar designed for secure anchoring in both cracked and non-cracked concrete. Backed by ETA approvals and engineered for high load capacity, this epoxy mortar is ideal for structural reinforcements, rebar connections, seismic retrofit, heavy steel anchoring, and demanding construction environment applications.
Why choose FIS EM Plus 390 S?
-
Optimized resin formulation yields enhanced load values in both cracked and non-cracked concrete.
-
Approved for diamond-drilled and water-filled drill holes, offering versatility under varied site conditions.
-
Validated for seismic zones with performance categories C1 and C2, ensuring resilience under dynamic loads.
-
Reliable performance at low temperatures (down to –5 °C) supports cold weather installations.
-
ETA assessment guarantees a service life of 100 years, and expert reports even extend this to 120 years.
-
Capable of anchoring rebar diameters from 8 mm up to 40 mm, accommodating a wide range of structural requirements.
Whether for retrofits, expansion joints, or high-load anchoring in concrete structures, FIS EM Plus 390 S delivers robust and durable bonding.
Applications
-
Post-installed rebar connections in existing concrete
-
Shear connectors, concrete layer jointers
-
Heavy steel structures, rail fixings, tall shelving systems
-
Seismic reinforcement & retrofit
-
Anchorings in water-filled or diamond-drilled holes
-
Temporary or removable fixings (in conjunction with internal threaded anchors)
-
Wood-concrete or wood-steel connections (approval for glued laminated timber)
How It Works
FIS EM Plus 390 S comes as a dual-component cartridge (resin + hardener). The two materials remain separated until extrusion through the included static mixer (FIS MR Plus), ensuring correct mixing only at point of use.
The mortar is injected bubble-free from the base of the drilled hole, fully bonding the anchor rod (or rebar) to the concrete wall surfaces and sealing the bore hole. In push-through installation, the annular gap between the anchor and the fixture is filled with the epoxy mortar.
Anchors such as Fischer FIS A threaded rods or internal threaded anchor RG M I (for temporary fixings) are compatible, giving flexibility in the design of embedment depth and load transfer.
Benefits & Advantages
-
Superior adhesion and load performance, even in cracked concrete
-
Durable under environmental and structural stress
-
Works under wet or flooded conditions — approved for use in water-filled drill holes
-
Suitable for seismic zones (C1, C2 performance)
-
Usable in low temperatures (down to –5 °C)
-
ETA-backed service life of 100 years (up to 120 years via expert report)
-
Simplified installation with pre-measured cartridges and static mixer
-
Compatible with various anchor rods and systems
Installation / Usage Guidelines (Brief)
-
Drill hole to specification (diameter, depth)
-
Clean thoroughly (blow & brush / vacuum)
-
Insert static mixer and begin injection from bottom
-
Insert anchor or rebar while rotating slightly
-
Allow curing (refer to curing times in technical datasheet)
-
Apply design loads after full cure
Technical Data Sheet (FIS EM Plus 390 S)
Below is a structured technical specification sheet suitable for engineering reference, datasheets, catalogs, or inclusion in marketing materials.
1. Product Identification
| Property | Value |
|---|---|
| Product name / variant | Fischer FIS EM Plus 390 S |
| Packaging | 390 ml cartridge + 2 × static mixer FIS MR Plus |
| Usage | Chemical anchoring / injection mortar for cracked & non-cracked concrete |
2. Approvals & Certifications
-
ETA-17/0979, ETA-17/1056: European Technical Assessments for bonding systems in concrete
-
Service life guarantee: 100 years (with expert report up to 120 years)
-
Seismic performance categories: C1, C2
-
Approved for use in diamond-drilled and water-filled holes
-
Timber anchoring approval (glued laminated timber of spruce, pine, fir)
-
Suitable for anchorings in sealed surfaces per Water Resources Law (WRL) / official building certificate for water-impermeable concrete
-
Tested materials: Concrete C20/25 to C50/60, possibly steel-fiber reinforced up to certain fiber content limits
3. Physical & Mechanical Properties
| Property | Testing Standard / Method | Typical Value |
|---|---|---|
| Density | DIN method | 1.4 – 1.6 g/cm³ |
| Linear shrinkage on cure | ASTM D2566 | < 0.01 % |
| Elongation at break | ASTM D695 | ~1.1 % |
| Bond strength after 20 days | ETAG (ETAG assessments) | > 11 MPa |
| Tensile strength (after 1 week) | ASTM D638 | ~51.3 MPa |
| Compressive strength | ASTM D695 | ~98 MPa |
| Compressive modulus | ASTM D695 | ~2,600 MPa |
| Heat deflection temperature | ASTM D648 | ~50 °C |
| Water absorption (14 days) | DIN / ASTM D570 | ~0.18 % |
| UV-resistance | DIN | Not UV resistant (dark grey color) |
| Temperature resistance | DIN | Up to 100 °C |
| Chemical resistance (1 % tenside solution) | DIN |
Note: The epoxy is not UV-resistant; exposure to sunlight may degrade surface properties over time.
4. Installation / Performance Data
-
Pull-out / bond performance: As per ETA datasheets (use design tables)
-
Minimum rebar diameter: 8 mm
-
Maximum rebar diameter: 40 mm
-
Effective temperature range during installation: –5 °C to +40 °C (some approvals)
-
Working / curing times: (refer to detailed ETA / technical datasheet)
-
Anchor embedment variation: Allows variable anchorage depth selection via compatible anchor rods
-
Bubble-free injection: Mortar is injected from bottom upwards to avoid air voids
5. Environmental & Safety Data (SDS Highlights)
From Safety Data Sheet for FIS EM Plus 390/585/1500 S:
-
Hazard classes / risks:
• Skin corrosion / severe burns (H314)
• Skin sensitization (H317)
• Respiratory irritation (H335)
• Reproductive toxicity (H360F)
• Hazardous to aquatic environment (H411) -
Precautionary Measures:
• Wear protective gloves, clothing, eye and face protection
• Avoid inhalation, skin or eye contact
• In case of skin or eye exposure, rinse immediately and seek medical attention
• Use only in well-ventilated areas
• Prevent release to environment -
Storage temperature: 5 °C to 25 °C (avoid extremes)
-
Shelf life / stability: Usually months (check original packaging or manufacturer’s statement)
-
Disposal considerations: Follow local regulations for hazardous chemical waste
6. Design & Specification Notes
-
Designers should refer to ETA / national approval documents for project-specific characteristic load tables and safety factors.
-
Always allow for appropriate safety factors, edge distances, spacing, and embedment lengths per code or design guideline.
-
For seismic applications, use performance category C1 / C2 data from approved documents.
-
Where water-filled or diamond-drilled holes are involved, ensure compliance with the product’s approval scope.
-
For timber anchoring, follow approved design guides for laminated timber types (spruce, pine, fir).
-
Use appropriate cleaning / hole preparation methods (blowing, brushing, vacuuming) to remove dust and debris for optimal bonding.
Related Products
Applications
Heavy Duty Lifting Belts are commonly used for:
- Construction sites
- Steel and metal industries
- Machinery lifting
- Factory material handling
- Warehouse operations
- Shipbuilding and shipyards
- Power plants
- Oil and gas industries
- Transportation and logistics
- Heavy equipment installation
- Precast concrete handling
- Pipe and structural steel lifting
- Product Type: Lever Hoist
- Mechanism: Manual Lever Operated
- End-Stop: Travelling End-Stop
- Capacity: 0.75–9 Ton (model dependent)
- Standard Lift: 1.5 m / 3 m / custom
- Load Chain: High-strength alloy steel
- Hook Type: Forged safety hook
- Brake: Mechanical load brake
- Application: Lifting, pulling, tensioning
- Suitable For: Factory, warehouse, construction, workshop and maintenance
- Capacity: 2000kg
- 3-in-1 Design
- Solid PU Wheels
- Tubular Steel Construction
Popular Pallet Hook Sizes
- 1 Ton Pallet Hook – Light to medium pallet handling
- 1.5 Ton Pallet Hook – Warehouse and industrial applications
- 2 Ton Pallet Hook – General heavy-duty material handling
- 2.5 Ton Pallet Hook – Construction and industrial lifting
- 3 Ton Pallet Hook – Heavy palletized loads
- 5 Ton Pallet Hook – Heavy-duty industrial applications
Popular Pallet Hook Sizes
- 1 Ton Pallet Hook – Light to medium pallet handling
- 1.5 Ton Pallet Hook – Warehouse and industrial applications
- 2 Ton Pallet Hook – General heavy-duty material handling
- 2.5 Ton Pallet Hook – Construction and industrial lifting
- 3 Ton Pallet Hook – Heavy palletized loads
- 5 Ton Pallet Hook – Heavy-duty industrial applications
- 181kg lifting capacity
- Supplied with a 1 year service warranty
- 2.5m maximum fork height
- Lightweight aluminium design with 60kg net weight
- 90mm minimum fork height for low-level load entry
- Can also be used as a trolley for transporting loads
- Take a look at our Wide Leg Stacker for better wider loads and greater stability
Rigging Hardware
Stainless Steel Rigging Hardware
Steel Wire Rope & Fittings
Chain & Chain Fittings
Cargo Control Products
Marine Rigging
Wire Sling / Steel Wire Rope Sling is a durable lifting accessory designed for heavy-duty lifting, hoisting, rigging, and material handling. Available in different sizes and lengths for construction, industrial, crane, and warehouse applications.
- Capacity: 2000kg
- 3-in-1 Design
- Solid PU Wheels
- Tubular Steel Construction
Available Sizes
1/4″, 5/16″, 3/8″, 1/2″, 5/8″ and selected heavy-duty sizes.
- High Load Capacity: Supports up to 300kg, ensuring efficient transportation of heavy goods.
- Foldable Handle: Allows easy storage and portability, saving space in warehouses.
- Durable Plastic Body: Corrosion-resistant and lightweight for long-term use.
- Smooth Maneuverability: Equipped with high-quality wheels for seamless movement.
- Non-Slip Platform: Provides stability for securely carrying goods.
- Ergonomic Design: Reduces strain on users during operation.
- Heavy-Duty Frame: Ensures robust performance under industrial conditions.
- Compact Storage: Folds easily when not in use.
Key Features:
- Heavy-duty steel construction
- Easy drum & cylinder movement
- Durable wheels
- Strong and stable frame
- Comfortable ergonomic handle
- Suitable for factories, warehouses & workshops
- Reduces manual handling effort
Reviews
There are no reviews yet.