Hioki DT4253 Digital Multimeter
৳ 29,900.00
The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth.
CAT IV 600 V, CAT III 1000 V
Description
Basic specifications
Regarding DMM Accuracy: Due to the many ranges and functions available in a DMM, only the basic accuracy is indicated for reference. Please refer to the brochure for detailed accuracy information.
| DC Voltage range | 600.0 mV to 1000 V 5 ranges, Basic accuracy: ±0.3 % rdg. ±5 dgt. |
|||||
|---|---|---|---|---|---|---|
| AC Voltage range | 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz Basic accuracy 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) |
|||||
| AUTO AC/DCV | Yes | |||||
| Resistance range | 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt. | |||||
| DC Current range | 60.00 μA to 60.00 mA, 4 ranges, Basic accuracy: ±0.8 % rdg. ±5 dgt. |
|||||
| From 4 to 20mA Percentage conversion display | Yes | |||||
| AC Current range (use with Clamp on probes) |
10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) | |||||
| Temperature (thermocouples) |
K: -40.0 to 400.0 °C , Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C | |||||
| Voltage detection | N/A | |||||
| Capacitance range | 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt. | |||||
| Frequency range | 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Basic accuracy: ±0.1 % rdg. ±1 dgt. |
|||||
| Continuity check | Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more |
|||||
| Diode test | Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V |
|||||
| Other functions | Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option), 4-20 mA percentage conversion | |||||
| Display | Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph | |||||
| Display refresh rates | 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s) | |||||
| Power supply | LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF) | |||||
| Dimensions and mass | 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D, 390 g (13.8 oz) (including batteries and holster) |
|||||
| Included accessories | Test lead L9207-10* ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4 * Replaced by the probe L9300 starting with batches manufactured in March, 2025. |
|||||
Related Products
The Fluke 87V industrial digital multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment.
- Safer and rugged: Safety rated CAT III 1000 V, CAT IV 600 V
- Accurate: Measure current, voltage, and frequency on complex variable frequency drive (VFD) signals
- This electrical multimeter correctly measures pulse-width modulated motor drive signals
- Save time: The 87V multimeter includes a built-in thermometer and temperature probe
- True-RMS AC voltage and current for measuring non-linear signals
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Simple operation and ruggedness.
Check of open phase and phase sequence are possible in one unit.
- Phase indicator designed to check the presence of open phase and also the phase sequence by rotating disk and lamps
- Can check a wide range of 3-phase power source from 110 to 600V
Sealed against dust, the unit ensures trouble-free performance - Small, Lightweight and portable. Designed for maximum ease of operation and ruggedness
Key features
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Frequency and temperature measurement
- Large easy-to-read display with bright white backlight
Main Features:
1. Measuring range 200,000Lux
2. Automatic measuring level selection
3. Maximum and Minimum reading hold function
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Specifications
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester:
1-2-3-4-5-6-7-8-G – RJ45
1-2-3-4-5-6 – RJ12
1-2-3-4 – RJ11
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
The 117 digital multimeter is a for electricians working in commercial and non-commercial premises that need non-contact voltage detection for faster and safer operations.
- Non-contact voltage detection
- AutoVolt automatic AC/DC voltage selection
- Prevent false readings caused by ghost voltage
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
This meter is a handheld automatic range digital multiemter which driven by battery. It can be used to measure such parameters as DCV, ACV, ACA and DCA, Resistance, Continuity Buzzer, Diode, Frequency etc.
Reviews
There are no reviews yet.