Kyoritsu Kew 4200 Earth Clamp Meter
৳ 149,500.00
- The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes in multi-earthing systems
- True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
- Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments
- Memory function up to 100 data
Description
Specification
| Earth resistance (Auto-ranging) | 20.00/200.0/1500Ω ±1.5%±0.05Ω(0.00 to 20.99Ω)*1 ±2%±0.5Ω(16.0 to 99.9Ω) ±3%±2Ω(100.0 to 209.9Ω) ±5%±5Ω(160 to 399Ω) ±10%±10Ω(400 to 599Ω) Values are displayed, but accuracy isn’t guaranted(600 to 1580Ω) |
|---|---|
| AC current (50/60Hz) (Auto-ranging) |
100.0/1000mA/10.00/30.0A ±2%±0.7mA(0.0 to 104.9mA) ±2%(80mA to 31.5A) |
| Operating indication | Earth resistance function : Constant voltage injection Current detection (Frequency : Approx.2400Hz) Dual Integration AC current function : Successive approximation |
| Over-range indication | “OL”is displayed when input exceeds the upper limit of a measuring range |
| Response time | Approx. 7 seconds (Earth resistance) Approx. 2 seconds (AC current) |
| Sample rate | Approx. 1 times per second |
| Current consumption | Approx. 50mA (max.100mA) |
| Measurement time | Approx.12 hours (when R6 is used) Approx.24 hours (when LR6 is used) |
| Auto power off | Turns power off about 10 minutes after the last button operation. |
| Conductor size | Approx. Ø32mm |
| Applicable standards | IEC 61010-1 CAT Ⅳ 300V Pollution degree2 IEC 61010-2-032, IEC 61326 (EMC) |
| Power source | LR6/R6 (AA)(1.5V) x 4 |
| Dimension | 246(L)×120(W)×54(D)mm |
| Weight | Approx. 780g (including batteries) |
| Accessories | 8304 (Resister for operation check) 9166 (Carrying case[Hard]) R6 x 4, Instruction manual |
Related Products
Fluke 376 FC True-RMS Clamp Meter
৳ 52,900.00
Add to cart
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
Fluke 179 TRMS Digital Multimeter
৳ 39,675.00
Add to cart
The Fluke 179 TRMS multimeter is a full-featured, precision digital multimeter for troubleshooting and repair of electrical and electronic systems.
- Built-in thermometer to measure temperature without having to carry a separate instrument
- Accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Victor 610C+ AC 1000V 1000A Digital Clamp Meter
৳ 2,300.00
Add to cart
This meter is a handheld automatic range digital multiemter which driven by battery. It can be used to measure such parameters as DCV, ACV, ACA and DCA, Resistance, Continuity Buzzer, Diode, Frequency etc.
Sanwa YX360TRF Analog Multitester
৳ 4,600.00
Add to cart
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
Hioki Clamp On Ac/dc Hitester 3288
৳ 19,550.00
Add to cart
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3288 and 3288-20 clamp multimeters are AC/DC current and voltage clamp meters that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires.
Kyoritsu Kew 2002PA Digital Clamp Meter
৳ 27,025.00
Add to cart
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
Sanwa CD800a Digital Multimeters
৳ 5,175.00
Add to cart
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
Kyoritsu Kew 4105a Earth Tester
৳ 36,800.00
Add to cart
- 3-Pole and 2-Pole Earth Resistance
- The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes
- Dust and drip proof (designed to IEC 60529 IP54)
- Large, easy-to-read LCD digital display.
- Designed to meet IEC 61010-1 safety standard
- Capable of measuring earth voltage
- Small and lightweight. Shock-resistant new case material
- 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test
Victor 6016B+ Digital Clamp Meter
৳ 1,725.00
Add to cart
The digital clamp meter is compact and portable, 3 1/2 digits LCD display instrument for measuring AC current, DC and AC voltage, resistance, diode and for testing audible continuity. It is ideal for measuring and monitoring electrical equipment and household electric appliances etc.
Fluke 325 True RMS Clamp Meter
৳ 31,050.00
Add to cart
Key Features
- True-rms AC/DC current, voltage, temperature, frequency
- Clamp meter, test leads, K-type thermocouple and soft case
- Versatile tool performs most front-line measurement tasks
Fluke 15B+ Digital Multimeter
৳ 17,250.00
Add to cart
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large easy-to-read display with bright white backlight
Kyoritsu 1009 Digital Multimeter
৳ 8,050.00
Add to cart
- Display : 3999 counts
- Auto-ranging and manual ranging selector provided (with range hold feature)
- Resistance range provides audible continuity test
- Automatically turns power off in about 30 minutes to conserve battery life
- Direct current measurement up to 10A AC and DC
Reviews
There are no reviews yet.