Luton DT-2234B Digital Tachometer
৳ 2,875.00
Luton DT 2234 B Digital Tachometer durable, long-lasting components, including a strong, lightweight ABS plastic housing, assures almost maintenance-free performance for many years. Detecting distance of Luton DT 2234 B Digital Tachometer 50 – 2,000 mm typically. Spec. of detecting distance is that under the size of reflecting tape is 10 mm square & the measuring RPM value is 1,800 PPM. The max. detecting distance may change under different environments, different reflecting tape or measuring RPM beyond 1800 PRM.
Description
Key Features:
- Laser light detecting source, long measuring range up to 2 meters, it is useful in the RPM measurement application where the machine would be a risk to the operator or close access is difficult or not possible.
- Wide measuring range from 10 to 100,000 RPM, 0.1 RPM resolution for the measured value < 1000 RPM.
- Microprocessor-based circuit, crystal time base, high precision with 0.05% accuracy.
- The high visible LCD display gives RPM reading exactly with no guessing or errors & saves battery energy.
- Memory with recall function, the last value, max., value, min. value will be stored into the memory automatically.
- The use of durable, long-lasting components, including a strong, lightweight ABS plastic housing, assures almost maintenance-free performance for many years.
Specification:-
Test range: 2.5 to 99,999 RPM
Resolution: 0.1 RPM(2.5 to 999.9 RPM)
Accuracy: ±(0 05%+1 digit)
Sampling time: 0.8 sec.(Over 60 RPM)
Test range selection: Automatic
Memory: Max value, min value, last value
Detecting distance: 50 to 250mm/2 to 10 inch(LED)
50 to 500mm/2 to 20 inch(Laser)
Time base: Quartz crystal
Circuit: Exclusive one-chip of microcomputer LSI circuit.
Battery: 4x 1.5V AAA(UM-3)
Power Consumption: Approx x45mA(Operation) (LED)
Approxx35mA(Operaion)(Laser)
Operation Temp: 0 to 50 C (32 to 122 F)
Size: 190x72x37mm
Weight: 220g(including battery)
Related Products
Safety Designed Multimeter
- Accurate reading with True RMS
- Large display with 6000 counts and Backlight
- MIN/MAX function
- Rugged and reliable
- Enhanced current measuring function using an external clamp sensor
- Sensor mode (with clamp sensor)
- Ergonomic design
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
The Fluke 87V industrial digital multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment.
- Safer and rugged: Safety rated CAT III 1000 V, CAT IV 600 V
- Accurate: Measure current, voltage, and frequency on complex variable frequency drive (VFD) signals
- This electrical multimeter correctly measures pulse-width modulated motor drive signals
- Save time: The 87V multimeter includes a built-in thermometer and temperature probe
- True-RMS AC voltage and current for measuring non-linear signals
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Fully Safety jaw
- Fully Safety jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.01A resolution
- Accurate reading with True RMS 60/600/1000A auto-ranging
- Long battery life
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
Key features
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Frequency and temperature measurement
- Large easy-to-read display with bright white backlight
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
- Fully safe jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.1A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
Specifications
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester:
1-2-3-4-5-6-7-8-G – RJ45
1-2-3-4-5-6 – RJ12
1-2-3-4 – RJ11
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
Very useful for power distribution companies, power utilities and maintenance fields
- Very useful for power distribution companies, power utilities and maintenance fields
- Red LED, as “Non Contact Voltage” function, gives warning to the user on the presence of AC voltage
- Double molding gives comfortable feeling in palm
- 6039 counts with Bar Graph display
- Minimum resolution 0.1A
Simple operation and ruggedness.
Check of open phase and phase sequence are possible in one unit.
- Phase indicator designed to check the presence of open phase and also the phase sequence by rotating disk and lamps
- Can check a wide range of 3-phase power source from 110 to 600V
Sealed against dust, the unit ensures trouble-free performance - Small, Lightweight and portable. Designed for maximum ease of operation and ruggedness
Reviews
There are no reviews yet.