Sanwa CD800a3 Digital Multimeters
৳ 6,900.00
- 6000 count
- True RMS
- 0.7 best accuracy (DCmV)
- Max/Min value hold
- Data hold, Range hold, Relative function
- EF (Electric Field) sensing
- Auto power off (30min.)(cancelable)
- Body cover for protection and as a tilt stand
- Back light
- Chip holder behind the body cover
Description
| CD800a3 | Measuring range | Best accuracy | Resolution | Input impedance |
|---|---|---|---|---|
| DCV | 600m/6/60/600V | ±(0.7%+3) | 0.1mV | 10MΩ |
| ACV | 6/60/600V | ±(1.6%+5) | 0.001V | 10MΩ |
| DCA | 60m/600mA | ±(2.2%+5) | 0.01mA | |
| ACA | 60m/600mA | ±(2.8%+5) | 0.01mA | |
| Resistance | 600/6k/60k/600k/6M/60MΩ | ±(1.2%+5) | 0.1Ω | |
| Capacitance | 60n/600n/6μ/60μ/600μ/6mF | ±(5%+10) | 0.01nF | |
| Frequency | 9.999/99.99/999.9/9.999k/99.99kHz | ±(0.5%+3) | 0.001Hz | |
| Duty cycle | 20%～80% | ±(0.5%+5) | 0.1% | |
| Continuity | Buzzer sounds at 39-60Ω or less. Open voltage: approx. 0.4V | |||
| Diode test | Open voltage: approx. 3V | |||
| EF detection | Detects ACV and EF of approx. 90V or more | |||
| Display | numeral display 6000/9999(Hz function) |
| Sampling rate | 3 times/sec. |
| Bandwidth | 40-400Hz |
| Fuse | 0.6A/600V 10kA Φ6.3×32mm Ceramic |
| Battery | R6x2 |
| Battery life | Approx.650h at DCV |
| Size/Mass | H176×W104×D46mm/Approx. 340g |
| Test lead length/Pin tip | Length: approx. 0.77m/19mm |
| Safety standards | IEC61010 CAT.IV 600V |
Related Products
The 117 digital multimeter is a for electricians working in commercial and non-commercial premises that need non-contact voltage detection for faster and safer operations.
- Non-contact voltage detection
- AutoVolt automatic AC/DC voltage selection
- Prevent false readings caused by ghost voltage
Main Features:
1. Measuring range 200,000Lux
2. Automatic measuring level selection
3. Maximum and Minimum reading hold function
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
- Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
- Provides a 10:1 Distance to spot ratio
- Offers single laser targeting for accurate and repeatable measurements
- Features IP54 rating against dust and moisture
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large easy-to-read display with bright white backlight
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
The Fluke 179 TRMS multimeter is a full-featured, precision digital multimeter for troubleshooting and repair of electrical and electronic systems.
- Built-in thermometer to measure temperature without having to carry a separate instrument
- Accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
The Smart Sensor ST8900 GAS Detector Meter is an Engineer friendly and it’s poplular meter In Bangladesh. You can explore the Smart Sensor ST8900 GAS Detector Meter Price in Bangladesh to get and that is a popular topic among safety professionals and industrial users looking for reliable multi-gas detection solutions. This portable device is designed to detect four types of gases simultaneously—oxygen (O₂), carbon monoxide (CO), hydrogen sulfide (H₂S), and combustible gases (LEL)—making it ideal for confined spaces, chemical industries, and utility inspections.
Key features
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Frequency and temperature measurement
- Large easy-to-read display with bright white backlight
The digital clamp meter is compact and portable, 3 1/2 digits LCD display instrument for measuring AC current, DC and AC voltage, resistance, diode and for testing audible continuity. It is ideal for measuring and monitoring electrical equipment and household electric appliances etc.
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
Reviews
There are no reviews yet.