Sanwa PM3 Digital Multimeter
৳ 4,600.00
8.5mm thick body with multi-function
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)(cancelable)
Description
Specifications
| PM3 | Measuring range | Best accuracy | Resolution | Input impedance |
|---|---|---|---|---|
| DCV | 400m/4/40/300V | ±(0.7%+3) | 0.1mV | 10M to 100MΩ |
| ACV | 4/40/300V | ±(2.3%+5) | 0.001V | 10M to 11MΩ |
| Resistance | 400/4k/40k/400k/4M/40MΩ | ±(2.0%+5) | 0.1 Ω | |
| Capacitance | 5n/50n/500n/5μ/50μ/200μF | ±(5.0%+10) | 0.001nF | |
| Frequency | 9.999/99.99/999.9/9.999k/60.00kHz | ±(0.7%+5) | 0.001Hz | |
| Duty cycle | 0.1 to 99% | |||
| Continuity | Buzzer sounds at less than 10Ω～120Ω Open voltage: Approx.0.4V | |||
| Diode test | Open voltage: approx. 1.5V | |||
| Display | Numeral display 4000 |
| Sampling rate | 3 times/sec. |
| Bandwidth | 40 to 400 Hz |
| Bettry | Coin type lithium battery CR2032(3V)x1 |
| Better life | Approx. 150 hours at DCV |
| Size/Mass | H108×W56×D11.5mm/Approx.50g |
| Test lead length/Pin tip | Length: approx. 0.5m/18mm |
| Safety | IEC61010 CAT.Ⅲ300V |
Related Products
Key Features
- True-rms AC/DC current, voltage, temperature, frequency
- Clamp meter, test leads, K-type thermocouple and soft case
- Versatile tool performs most front-line measurement tasks
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
Key features
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Frequency and temperature measurement
- Large easy-to-read display with bright white backlight
Specifications:
- General
- Power : 6F22 (9V) x 1
- Dimensions : 190 x 88.5 x 27.5 mm
- Weight : approx. 320g (including battery)
This meter is a handheld automatic range digital multiemter which driven by battery. It can be used to measure such parameters as DCV, ACV, ACA and DCA, Resistance, Continuity Buzzer, Diode, Frequency etc.
The Fluke 179 TRMS multimeter is a full-featured, precision digital multimeter for troubleshooting and repair of electrical and electronic systems.
- Built-in thermometer to measure temperature without having to carry a separate instrument
- Accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Hioki insulation testers or megohmmeters feature all-in-one designs, including built-in rugged cases and test lead storage compartments. The IR4056 is a 5-range, 50V to 1000V digital insulation resistance tester featuring efficient functions and advanced features to help reduce work time associated with field insulation testing.
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3288 and 3288-20 clamp multimeters are AC/DC current and voltage clamp meters that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires.
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large easy-to-read display with bright white backlight
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
The digital clamp meter is compact and portable, 3 1/2 digits LCD display instrument for measuring AC current, DC and AC voltage, resistance, diode and for testing audible continuity. It is ideal for measuring and monitoring electrical equipment and household electric appliances etc.
Reviews
There are no reviews yet.