Sanwa PM3 Digital Multimeter
৳ 4,600.00
8.5mm thick body with multi-function
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)(cancelable)
Description
Specifications
| PM3 | Measuring range | Best accuracy | Resolution | Input impedance |
|---|---|---|---|---|
| DCV | 400m/4/40/300V | ±(0.7%+3) | 0.1mV | 10M to 100MΩ |
| ACV | 4/40/300V | ±(2.3%+5) | 0.001V | 10M to 11MΩ |
| Resistance | 400/4k/40k/400k/4M/40MΩ | ±(2.0%+5) | 0.1 Ω | |
| Capacitance | 5n/50n/500n/5μ/50μ/200μF | ±(5.0%+10) | 0.001nF | |
| Frequency | 9.999/99.99/999.9/9.999k/60.00kHz | ±(0.7%+5) | 0.001Hz | |
| Duty cycle | 0.1 to 99% | |||
| Continuity | Buzzer sounds at less than 10Ω～120Ω Open voltage: Approx.0.4V | |||
| Diode test | Open voltage: approx. 1.5V | |||
| Display | Numeral display 4000 |
| Sampling rate | 3 times/sec. |
| Bandwidth | 40 to 400 Hz |
| Bettry | Coin type lithium battery CR2032(3V)x1 |
| Better life | Approx. 150 hours at DCV |
| Size/Mass | H108×W56×D11.5mm/Approx.50g |
| Test lead length/Pin tip | Length: approx. 0.5m/18mm |
| Safety | IEC61010 CAT.Ⅲ300V |
Related Products
- 3-Pole and 2-Pole Earth Resistance
- The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes
- Dust and drip proof (designed to IEC 60529 IP54)
- Large, easy-to-read LCD digital display.
- Designed to meet IEC 61010-1 safety standard
- Capable of measuring earth voltage
- Small and lightweight. Shock-resistant new case material
- 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test
- Display : 3999 counts
- Auto-ranging and manual ranging selector provided (with range hold feature)
- Resistance range provides audible continuity test
- Automatically turns power off in about 30 minutes to conserve battery life
- Direct current measurement up to 10A AC and DC
Specifications:
- General
- Power : 6F22 (9V) x 1
- Dimensions : 190 x 88.5 x 27.5 mm
- Weight : approx. 320g (including battery)
Measurement of both AC and DC current with transformer jaws of large diameter
- Measurement of both AC and DC current with transformer jaws of large diameter
- Can measure AC and DC currents up to 2000A
- Output terminal for recorder connection
- AC/DC voltage, resistance measurement and continuity functions also available
- Minimum resolution 0.1A
2GB Paper moisture meter is a high-performance and digital moisture testing equipment by our company based on introduction of foreign advanced technology. The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gear is used to measure different kinds of papers, This moisture meter have high precision measuring instruments, and the small size, light weight, portable on-site testing.
- Double Injection Case makes the device more stylish and solid. Streamline Design and Comfortable Handle.
- Large LCD Display makes the reading more clearly.
- Intelligent selection makes the operation simpler.
This instrument is a 6000 counts hand-held automatic range True RMS digital clamp meter. The circuit design of the meter takes the large-scale integrated circuit ∑/△ analog-to-digital converter (ADC) as the core, and it has the full-range overload protection. It can be used to measure AC and DC voltage, low-pass filter V.F.C, low-impedance Low Z voltage, AC and DC current, resistance, diode, continuity test, capacitance, frequency, duty cycle, temperature and other parameters, at the same time, it has the data hold, relative value measurement, surge current measurement function, flashlight function, NCV function, Live line judgment, low voltage display and automatic shutdown function.
The Fluke 179 TRMS multimeter is a full-featured, precision digital multimeter for troubleshooting and repair of electrical and electronic systems.
- Built-in thermometer to measure temperature without having to carry a separate instrument
- Accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
The digital clamp meter is compact and portable, 3 1/2 digits LCD display instrument for measuring AC current, DC and AC voltage, resistance, diode and for testing audible continuity. It is ideal for measuring and monitoring electrical equipment and household electric appliances etc.
- 600 V Cat III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measures voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large easy-to-read display with bright white backlight
- Fully safe jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.1A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Very useful for power distribution companies, power utilities and maintenance fields
- Very useful for power distribution companies, power utilities and maintenance fields
- Red LED, as “Non Contact Voltage” function, gives warning to the user on the presence of AC voltage
- Double molding gives comfortable feeling in palm
- 6039 counts with Bar Graph display
- Minimum resolution 0.1A
Reviews
There are no reviews yet.