Total 3/4″ Air Impact Wrench 1600Nm (Model: TAT40342)

Description

The TOTAL air impact wrench TAT40342 is a heavy 3/4″ pneumatic wrench with 1600Nm of torque. It is built for truck and bus wheel nuts.

Key Features of the Air Impact Wrench TAT40342

• 1600Nm max torque
• Twin hammer mechanism
• 3/4″ square drive, 4000rpm
• Universal connector
• 3/8″ air inlet, 1/2″ air hose

TOTAL TAT40342 Specifications

• Square drive:19mm(3/4″)
• No-load speed:4000 rpm
• Max.torque:1600Nm(1180ft)
• Weight: 6.0KG
• Twin hammer mechanism
• With universal connector
• Air Consumption:256l/min(9cfm)
• Air Pressure:6.2bar(90psi)
• Length:234mm(9.2″)
• Air Inlet:3/8″
• Air hose:1/2″
• Packed by color box

Who Should Buy the TAT40342?

Truck, bus and heavy vehicle tyre shops.

Air Supply Matters

This wrench needs about 256 L/min at 6.2 bar. A small compressor will not keep up, so use a large tank compressor and a 1/2″ hose.

Oil the air inlet daily and drain water from the compressor tank. Clean, dry air keeps the twin hammer running smoothly for years.

Safe Use and Care

Use impact-rated sockets and bits only, because standard ones can crack. In addition, wear safety glasses and hold the tool firmly when you loosen tight nuts.

Buying from Magnet Engineering

Every item is original TOTAL stock. We deliver across Bangladesh, and you can check the parcel before you pay. For workshops and contractors, we also give bulk quotes.

See all Impact Wrench & Drivers.