Sanwa CD800a3 Digital Multimeters
৳ 6,900.00
- 6000 count
- True RMS
- 0.7 best accuracy (DCmV)
- Max/Min value hold
- Data hold, Range hold, Relative function
- EF (Electric Field) sensing
- Auto power off (30min.)(cancelable)
- Body cover for protection and as a tilt stand
- Back light
- Chip holder behind the body cover
Description
| CD800a3 | Measuring range | Best accuracy | Resolution | Input impedance |
|---|---|---|---|---|
| DCV | 600m/6/60/600V | ±(0.7%+3) | 0.1mV | 10MΩ |
| ACV | 6/60/600V | ±(1.6%+5) | 0.001V | 10MΩ |
| DCA | 60m/600mA | ±(2.2%+5) | 0.01mA | |
| ACA | 60m/600mA | ±(2.8%+5) | 0.01mA | |
| Resistance | 600/6k/60k/600k/6M/60MΩ | ±(1.2%+5) | 0.1Ω | |
| Capacitance | 60n/600n/6μ/60μ/600μ/6mF | ±(5%+10) | 0.01nF | |
| Frequency | 9.999/99.99/999.9/9.999k/99.99kHz | ±(0.5%+3) | 0.001Hz | |
| Duty cycle | 20%～80% | ±(0.5%+5) | 0.1% | |
| Continuity | Buzzer sounds at 39-60Ω or less. Open voltage: approx. 0.4V | |||
| Diode test | Open voltage: approx. 3V | |||
| EF detection | Detects ACV and EF of approx. 90V or more | |||
| Display | numeral display 6000/9999(Hz function) |
| Sampling rate | 3 times/sec. |
| Bandwidth | 40-400Hz |
| Fuse | 0.6A/600V 10kA Φ6.3×32mm Ceramic |
| Battery | R6x2 |
| Battery life | Approx.650h at DCV |
| Size/Mass | H176×W104×D46mm/Approx. 340g |
| Test lead length/Pin tip | Length: approx. 0.77m/19mm |
| Safety standards | IEC61010 CAT.IV 600V |
Related Products
Fully Safety jaw
- Fully Safety jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.01A resolution
- Accurate reading with True RMS 60/600/1000A auto-ranging
- Long battery life
- Safety Standard IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V
The Smart Sensor ST8900 GAS Detector Meter is an Engineer friendly and it’s poplular meter In Bangladesh. You can explore the Smart Sensor ST8900 GAS Detector Meter Price in Bangladesh to get and that is a popular topic among safety professionals and industrial users looking for reliable multi-gas detection solutions. This portable device is designed to detect four types of gases simultaneously—oxygen (O₂), carbon monoxide (CO), hydrogen sulfide (H₂S), and combustible gases (LEL)—making it ideal for confined spaces, chemical industries, and utility inspections.
- Backlit dual display of humidity and temperature
- Measures dew point and wet bulb temperatures
- 99 record storage capacity
- Ergonomic design with belt clip and protective holster
- Quick-response capacitance sensor
- Compact and lightweight (188 g /6.6 oz)
- Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
- Relative humidity from 5% to 95%
- Min/Max/Avg Data hold
- Low battery indicator
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
Can measure large AC current up to 2000A
- Can measure large AC current up to 2000A
- Peak hold function
- φ55mm large tear drop shaped jaws
- Minimum resolution 0.1A
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
- Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
- Provides a 10:1 Distance to spot ratio
- Offers single laser targeting for accurate and repeatable measurements
- Features IP54 rating against dust and moisture
4105A ground resistance tester
1. This digital ground resistance tester is a new generation of electrical test instruments, beautiful and practical style.
2. Full-featured, high accuracy, convenient and reliable operation, dustproof moisture-proof structure, better suited to field use.
3. It can be used to measure a variety of power systems, electrical equipment, lightning protection equipment grounding system grounding resistance value, it can also measure AC voltage
4. LUX/FC unit selection
5. Reading locked hold
6. Automatic data recording
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.
Specifications
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester:
1-2-3-4-5-6-7-8-G – RJ45
1-2-3-4-5-6 – RJ12
1-2-3-4 – RJ11
The digital clamp meter is compact and portable, 3 1/2 digits LCD display instrument for measuring AC current, DC and AC voltage, resistance, diode and for testing audible continuity. It is ideal for measuring and monitoring electrical equipment and household electric appliances etc.
Reviews
There are no reviews yet.